Hello, I having a problem with Elk detecting changes to a counter set through UltraM1G (current version). I know that I am setting it correctly through a HS EVENT since I can see the counter (announce_elk) value (0 or 1) changing under Counters in the UltraM1G page. The time/date stamp change as well.
But Elk does not notice this change. Elk does notice when I do this with a F1 keypad toggle using this logic in Elk:
WHENEVER F1 KEY ON ANY KEYPAD ACTIVATES
THEN TOGGLE announce_elk (Counter 8) BETWEEN 0 AND 1
** The next several lines below only work with the F1 toggle above and not when UltraM1G sets the counter
WHENEVER announce_elk (Counter 8) CHANGES TO 1
THEN DISPLAY "Announce ON" IN Our House (Area 1) INDEFINITELY,[*]CLEARS
THEN SET CHIME TO DING AND VOICE IN Our House (Area 1)
WHENEVER announce_elk (Counter 8) CHANGES TO 0
THEN DISPLAY "Announce OFF" IN Our House (Area 1) INDEFINITELY,[*]CLEARS
THEN DISABLE CHIME IN Our House (Area 1)
Am I missing something? I have reloaded my entire Elk settings to UltraM1G and no errors come up in the HS log.
Sonny
But Elk does not notice this change. Elk does notice when I do this with a F1 keypad toggle using this logic in Elk:
WHENEVER F1 KEY ON ANY KEYPAD ACTIVATES
THEN TOGGLE announce_elk (Counter 8) BETWEEN 0 AND 1
** The next several lines below only work with the F1 toggle above and not when UltraM1G sets the counter
WHENEVER announce_elk (Counter 8) CHANGES TO 1
THEN DISPLAY "Announce ON" IN Our House (Area 1) INDEFINITELY,[*]CLEARS
THEN SET CHIME TO DING AND VOICE IN Our House (Area 1)
WHENEVER announce_elk (Counter 8) CHANGES TO 0
THEN DISPLAY "Announce OFF" IN Our House (Area 1) INDEFINITELY,[*]CLEARS
THEN DISABLE CHIME IN Our House (Area 1)
Am I missing something? I have reloaded my entire Elk settings to UltraM1G and no errors come up in the HS log.
Sonny
Comment