Announcement

Collapse
No announcement yet.

HD11A X10 Woes! Can see in but

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by Dafunktyfunk View Post
    Yes, Sir. It is active and receiving commands, just not sending them.
    Did you use another software to load data to the CM11A before? If so you may want to clear the memory using the old software and see if this helps. I've never experineced a lamp module not working in the same outlet as the X10 interface so there may be something up with the interface.
    💁‍♂️ Support & Customer Service 🙋‍♂️ Sales Questions 🛒 Shop HomeSeer Products

    Comment


      #17
      Originally posted by Rupp View Post
      Did you use another software to load data to the CM11A before? If so you may want to clear the memory using the old software and see if this helps. I've never experineced a lamp module not working in the same outlet as the X10 interface so there may be something up with the interface.

      You know what!!!??!?!? YOU'RE right. I used this module like 8 years ago in an old IBM director software. It has been in a box unused for 7 of those years. I took it out of the box yesterday to start working with it. The software is long gone and will only run on win98 so I am not able to load it as I am running Win 7 x64.

      I wonder how I can clear it now... Suggestions?

      This computer has not used any other software to control x10 and the HD11A has not been used with any other software.
      Transitioning to HS3Pro .298 - WinXPEmbedded

      Hometroller S3 Pro - WinXPEmbedded - HSP 2.5.0.81 - BLStat - HSPhone - HSTouch Srvr 1.0.0.73 - Touchpad - BLLan - BLOccupied - DSC Plug 2.0.0.14 - BLStat .38

      Comment


        #18
        Originally posted by Dafunktyfunk View Post
        You know what!!!??!?!? YOU'RE right. I used this module like 8 years ago in an old IBM director software. It has been in a box unused for 7 of those years. I took it out of the box yesterday to start working with it. The software is long gone and will only run on win98 so I am not able to load it as I am running Win 7 x64.

        I wonder how I can clear it now... Suggestions?

        This computer has not used any other software to control x10 and the HD11A has not been used with any other software.
        If you are going to stick with X10 I would recommend a TI-103 as this is the best X10 controller left.
        http://store.homeseer.com/store/X10-C45.aspx
        💁‍♂️ Support & Customer Service 🙋‍♂️ Sales Questions 🛒 Shop HomeSeer Products

        Comment


          #19
          Originally posted by Rupp View Post
          If you are going to stick with X10 I would recommend a TI-103 as this is the best X10 controller left.
          http://store.homeseer.com/store/X10-C45.aspx
          the price has been falling on that one.. so some day i may switch too..

          but my usb 1132u will have to die first!!!!!

          i agree that the cm11a should be replaced with something better...
          HW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64

          HS - HS3 Pro Edition 3.0.0.435

          Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190

          Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface

          Comment


            #20
            got my xpcr in today from ebay... and installed in 3 minutes.... and BACK IN BUSINESS!!!! all my xmas lights are working again... so was my problem... all my x10 woes are gone AGAIN!!!!!!!!!!
            HW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64

            HS - HS3 Pro Edition 3.0.0.435

            Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190

            Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface

            Comment


              #21
              That is good news!

              I hope mine comes in soon!
              Transitioning to HS3Pro .298 - WinXPEmbedded

              Hometroller S3 Pro - WinXPEmbedded - HSP 2.5.0.81 - BLStat - HSPhone - HSTouch Srvr 1.0.0.73 - Touchpad - BLLan - BLOccupied - DSC Plug 2.0.0.14 - BLStat .38

              Comment


                #22
                Originally posted by Dafunktyfunk View Post
                That is good news!

                I hope mine comes in soon!

                yeah you will see a difference.. but you still have to realize if you get it working great.. and it stops.. what was the last thing you plugged in..

                i have a whole box of z-wave stuff to put in.. but i refuse to get rid of my x10!!!!!!!!!! HAH
                HW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64

                HS - HS3 Pro Edition 3.0.0.435

                Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190

                Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface

                Comment

                Working...
                X