It will be a little bit. SH says they expect in stock on Dec 7th (I don't get the beta releases )
Announcement
Collapse
No announcement yet.
New Insteon Hub as a network enabled PLM
Collapse
This topic is closed.
X
X
-
Originally posted by heatvent View PostIt will be a little bit. SH says they expect in stock on Dec 7th (I don't get the beta releases )Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
Originally posted by pbibm View PostMark, dual band and X10 are "in there"?Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
Mark, how will your plugin work with the hub? I am guessing your plugin is in control and tells the hub to setup links, etc. Does a device also show up in the hub or must it be added by the hub OS (which I would think would cause conflicts with your plugin).
Originally posted by pbibm View PostHow interesting. If I got it right, this would allow normal HS use, plus placing the controller where you want it ..and.. using the free smarthome IOS and android apps. You wouldn't have to support that with homeseer, but it should work standalone I would l think.
Its like mixing the plm with the other controllers they offer that have timers and web control.
Comment
-
Originally posted by heatvent View PostMark, how will your plugin work with the hub? I am guessing your plugin is in control and tells the hub to setup links, etc. Does a device also show up in the hub or must it be added by the hub OS (which I would think would cause conflicts with your plugin).
my plugin isn't going to configure anything that you would have to configure via the hub interface. I think the hub saves all its config in memory which is a black box to me; there are no dev notes for the web UI. so all that config is on the user.
i think the hub was meant to be used in conjuction with software like houselinc or homeseer now. Not sure if houselinc configures the web ui features of the hub.Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
Originally posted by mnsandler View Post... my plugin isn't going to configure anything that you would have to configure via the hub interface. I think the hub saves all its config in memory which is a black box to me ...
Even so, I guess this doesn't help you with the plugin as you would need access to the credentials to get to the cloud.
Comment
-
Originally posted by claude View PostLooking at the quick start for this hub, I read "The INSTEON Hub stores your homes configuration in the cloud which allows access from any number of smartphones and tablets you may own".
Even so, I guess this doesn't help you with the plugin as you would need access to the credentials to get to the cloud.
The plugin is only going to access the internal plm to send and receive msgs (via http). No username or password required or supported at this time.Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
I'm not sure how long the buffer data survives, but based on my testing of just turning on a single switch (which then generates up to 4 msgs in a sec), i have been able to capture all of them.
i can make this an ini setting based on millisecs so you can tweak it lower if you want. its really just a matter of how much load you are willing to put on your server and network.Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
Originally posted by mnsandler View Post... The plugin is only going to access the internal plm to send and receive msgs (via http)...
Comment
-
the dev notes are not for public consumption. but i suppose you could reverse engineer it.
PS the hub plm fw is not field upgradable. Only the web UI is field upgradable.Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
Plugin Insteon hub support official?
Hi Mark,
I'm close to acquiring the Insteon hub but only if your plugin supports it.
So does the Insteon hub have official support?
I presume so, given you have already developped for it, but need to make sure. If so, when do you think we will see a version with that support?
Comment
-
Originally posted by claude View PostHi Mark,
I'm close to acquiring the Insteon hub but only if your plugin supports it.
So does the Insteon hub have official support?
I presume so, given you have already developped for it, but need to make sure. If so, when do you think we will see a version with that support?Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
Comment