Announcement

Collapse
No announcement yet.

Setup Issue?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Setup Issue?

    As a toe in the water I have recently installed a PLCBus PC interface (PLCBUS-1141) and a lamp module (PLCBUS-2026U) with the PLCBus Connector.

    After setting up and registering the lamp module I set the lamp to ON (100%) in HS but the lamp came on dimmed to about 25%. Using HS I ramped the dim level to 95% which woked. I then switched the lamp OFF but when I switched the lamp back on it goes to 25% again.

    Any ideas?

    #2
    I reset the lamp device and deleted scenes etc and its working OK now.

    thanks
    Gary

    Comment


      #3
      OK.

      In the PlcBus Lamp configuration (PLCBUS plugin web configuration interface), you have several options to dim the lamp to the last dim level, or to a specific level ... etc.

      Best regards,

      stipus
      --
      stipus

      Comment

      Working...
      X