Announcement

Collapse
No announcement yet.

mcsTemperature V5 - Browser based setup

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    mcsTemperature V5 - Browser based setup

    V5 of mcsSprinklers replaces V4. V5 will the supported version going forward.


    PR522 5.0.21 Failures with two virtual thermostats active at same time PR523 non-mcsTemperature Discrete output not recorded to database under HS2
    PR524 5.0.17 Colors do not have sufficient contrast for setup pages browser presentation
    PR525 5.0.17 Migrate 2-device averaging as calibration option from V4 to V5
    PR526 5.0.17 Temp05/08 looks to have crlf stripped
    PR527 5.0.17 Separate bias from average calibrations *** may affect existing calibration setups ****
    PR528 5.0.17 Modify style sheet for gray over gray
    PR529 5.0.60 Emulated thermostat readings not being saved to database corrrectly
    PR530 5.0.21 Cleanup needed on device type pulldown selector
    temperature/voltage
    PR531 5.0.22 Combined Thermostat and Temperature types on same axis
    PR532 5.0.23 Subscript range error on Thermostat display type
    PR533 5.0.60 Corrections to Thermostat/Temperature on same chart
    PR534 5.0.63 HS2 Header option selection on Display tab/page
    PR535 5.0.64 Text vs Icon only for Temperature setting cannot be changed
    PR536 5.0.65 HS2 header option not sticking on browser selection
    PR537 5.1.0 Radio buttons values always save to same value
    PR538 5.1.0 Duplicate DB entry message not shown on Sensor save
    PR539 5.1.0 XCustomFooter error message
    PR540 5.1.0 Added Hobbyboards barometer
    PR541 5.1.5 Baro implementation fixes
    PR542 5.1.8 Format Thermostat devices with HTML temperature icons
    PR543 5.2.0 Use separate set of thermostat icons in \thermostats folder
    PR544 5.2.0 Change icon filenames to use _ rather than -
    PR545 5.2.0 Low/High temperature resolution not handled properly
    PR546 5.2.2 Quotes not accepted in UL/LL expressions
    PR547 5.2.2 Generalized & shortcut expressions now allowed for UL/LL
    PR548 5.2.3 HS2 does not process querystring on posted data
    PR549 5.2.5 Max resolution for DS18S20 does not work
    PR550 5.2.6 Add methods to assist in get device string/value data
    PR551 5.2.7 Remove spaces from Database Date Field name
    PR552 5.2.7 Allow single quotes to be entered on Sensor Page for DC
    PR553 5.2.8 Error counts do not reset when reset button clicked
    PR554 5.2.9 Default chart sizes not shown on Display Page
    PR555 5.2.10 DS2408 errors with AAG Multi-IO
    PR556 5.2.10 Compare Device expression error on Temperature triggers
    PR557 5.2.16 Multio switch status changes when relay set
    PR558 5.2.16 Client screen size processing incorrect
    PR559 5.2.16 ACCID setting does not stick from browser setup
    PR560 5.2.16 Use WeatherPLUG setting not changable from browser
    PR561 5.2.16 Forever option added to Temperature Action
    PR562 5.2.17 Added debug to direct DS2408 output via adapter
    PR563 5.2.19 Reverse init polarity for DS2408 vs. DS2405/06
    PR564 5.2.20 Discrete dictionary debug code added
    PR565 5.2.21 Case sensitivity to device codes used as discretes
    PR566 5.3.0 Add alternate licensing mechanism to support HS1 users
    PR567 5.4.0 WeatherPLUG settings not retained
    PR568 5.4.0 Download method GetWebFile vs INET selection on Forecast setup
    PR569 5.4.1 Remove INET debug output to HS log
    PR570 5.5.1 Remove "A99" updates
    PR571 5.5.2 Add key to specify non-default source for weatherxml file
    PR572 5.6.0 Add support for 2nd Temp08 lightning counter
    PR573 5.6.0 Add support for wattage via Temp08 Lightning counter
    PR574 5.6.3 Defaults missing from Browser setup
    PR575 5.6.4 Add precision to water flow when calibration cnts/gallon > 1
    PR576 5.6.5 SQL ALTER Forecast error message
    PR577 5.6.6 Expand Database Line 1330 error
    PR578 5.6.8 Wattage from Temp08 has start of day bias
    PR579 5.6.9 Ignore "Show only icon" setting for Thermostat types
    PR580 5.7.0 MSNBC replaced with NOAA NWS
    PR581 5.7.1 WeatherXML broken with 5.7.0
    PR582 5.7.2 Forecast Min devices not updating
    PR583 5.7.2 30 minute WeatherXML message repeated often
    PR584 5.7.3 Date encoding for NWS not handled correctly
    PR585 5.7.5 Increase Wind Direction tolerance from 0.25 to 0.5 volts
    PR586 5.7.6 Add knots as option for wind speed
    PR587 5.8.0 Include Forecast devices in set of Temperature Triggers
    PR588 5.8.0 Make Temperature Action readable under HS2
    PR589 5.9.0 Add CK1610 Octal Relay / Quad Input interface
    PR590 5.9.4 Create database tables for CK1610
    PR591 5.9.5 Use HTML formatting for discretes too
    PR592 5.10.0 Add option to exclude page links above charts
    PR593 5.11.0 Add Weatherunderground upload of sensor data
    PR594 5.11.1 Format Control Actions with line break when HTML formatted
    PR595 5.11.2 Allow initialization to proceed after reporting error in hs log
    PR596 5.11.3 Stop any prior navigation prior to downloading weather data
    PR597 5.12.0 Add DS2408 as Wind Direction encoder
    PR598 5.12.2 Special Debug is now for Temperature Action output
    PR599 5.12.3 DS2438 Temperature Calibration is ignored
    PR600 5.12.4 Temp08 DS2438 configured as voltage causes duplicate DB entries
    PR601 5.12.6 WeatherXML file not downloaded using INET method
    PR602 5.12.7 F1MIN etc not created in Forecast table
    PR603 5.12.8 Improve qualification of database field names entered by user
    PR604 5.12.8 Only change the Device Type for devices owned by mcsTemperature
    PR605 5.12.9 Some WeatherUnderground settings not retained on setup
    PR606 5.12.9 Reverse Wind Direction checkbox not functional on browser page
    PR607 5.12.10 Daily counters based on DS2423 do not reset at midnight
    PR608 5.12.11 Temperature actions do not trigger when temperature persists at limit
    PR609 5.13.0 Sensor Page sort buttons not working
    PR610 5.13.0 Convert Weather Underground upload to English units
    PR611 5.13.0 Add abilty to remove groups from chart group list
    PR612 5.13.1 Recorrect reset of counters at midnight
    PR613 5.13.2 CK1610 location cannont be changed from Temperature
    PR614 5.13.2 Temperature Actions do not start on HS restart
    PR615 5.13.5 CK1610 discretes (and maybe other discretes) icon remains OFF
    ----- above in updater -----
    PR616 5.13.6 Prevent starting asychronous activity during HS shutdown
    PR617 5.13.7 Add debug info for TriggerAction Subscript range error
    PR618 5.13.10 GetGroup subscript range error at line 1110
    PR619 5.13.10 Delete only mcsTemperature devices from GUI when sensor removed
    PR620 5.13.13 First attempt at DS2413
    PR621 5.13.14 CK1610 relay status not tracking correctly in DeviceString & database
    PR622 5.13.15 GetWeather2 Error on Line 220
    PR623 5.13.17 Wattage rate remains at 0
    PR624 5.13.18 Dont compute rates when sample interval is 0
    PR625 5.13.19 Enforce Event Disabled property for Temperature Actions (requires HS restart when property changed)
    PR626 5.14.0 Add DS2760 for moisture sensor
    PR627 5.14.1 Remove DS9097U Poll debug
    PR628 5.14.2 Control.gif icon changed to ControlON.gif and ControlOFF.gif
    PR629 5.14.3 Added ControlInactive.gif logic and set of 3 control icons
    PR630 5.14.4 Add hidden customization of link text [Temperature] LinkText=xxxx
    PR631 5.14.5 Head.htm included when ExcludeHeadersAndFooters setting enabled
    PR632 5.14.6 Client screen size settings lost on Save
    PR633 5.15.0 User selection for COM 1-wire adapter (DS9097U)
    PR634 5.16.0 Add user-selectable Temperature Action iteration rate
    PR635 5.16.2 Accomodate expressions in Temperature Action/Trigger for international user decimal variations

    ----- above in updater -----

    PR636 5.16.3 Put limits on InterationInterval as reading from .ini file
    PR637 5.16.3 Restore support for two DS2423 counters from Temp08
    PR638 5.16.4 InitIniVariables error on line 63
    PR639 5.16.5 WindDirection also shows up with DS2408 device
    PR640 5.17.0 Add support for 2408 as 8 independent discretes
    PR641 5.17.12 Correct DS2760 to use Moisture rather than Wind Direction logic
    PR642 5.17.17 Correct DS2408 status/icons
    PR642 5.18.3 Allow Cllient-dependent IP to be entered as subnet

    ------ superceeded by version 6 ------------

    http://board.homeseer.com/showthread.php?t=137503
    Attached Files
    Last edited by Michael McSharry; October 25, 2009, 08:39 PM.

    #2
    mcstemp do's not work after update homeseer

    can it be that my version of mcstemp is to old.
    can i save update mcstemp to version 5

    the graphs do not work after updating homeseer to the latast version

    Comment


      #3
      There have been a couple updates along the way that changes the structure of the database or ini file and these were done with logic internal to mcsTemperature to recognize an old format vs the new one. I suspect that if the jump was from something very old such as V3 there may be something that did not get converted.

      If you provide some more specifics of what you have, what errors show up in the log, and what upgrades you are making then there may be more info I can provide.

      Comment


        #4
        5.0.22 rev
        2006-10-23 13:59:03 - mcsTemperature - Draw CD Chart with on line 10220 Subscript out of range

        Comment


          #5
          Try V5.0.23 to overcome the subscript range error.

          Comment


            #6
            Trying 6 hours later (now working my company)
            Q: Control device refresh not looking for my two virtual thermostat. the rev 552 (4.47.34) built in 5.x release?

            Comment


              #7
              reply

              the version mcs temp i am running is 4.41.0.2and i have updated homeseer yesterday to the last update shown inthe updater
              i am not sure but i gese it,s 2.1 beta or some thing

              i have run the repair of .net2.0 framework and it seems to work again.
              but it seems to run slower as before.

              still i have the question do i need to update mcstemp?
              or can i still using the version i run?

              Comment


                #8
                Modify post (half working)
                The thermostat color area in left axis, and the bar in right axis
                Q: can bar without dotes?
                Attached Files
                Last edited by Droopyear; October 23, 2006, 08:39 PM.

                Comment


                  #9
                  harrympower,
                  V4 of mcsTemperature does not need to be upgraded. The only thing you gain at this time from V5 is the browser setup vs the window forms setup.

                  droppyear,
                  I remember nothing about this thermost chart so you need to help me with the setup. How many thermostat devices and how many temperature devices and how many discretes? Are there any other device types showing? If I wanted to set it up for a test here what would my settings look like?

                  There is a setting where then dot size delta is specified. It can be set so that only lines or lines with small dots are shown. Is this what you want?

                  Comment


                    #10
                    my ini, and datafile
                    Attached Files

                    Comment


                      #11
                      Droppyear,
                      While it was not an easy fix, the data set you provided made it much better for me. V5.0.60 produces a chart like this which I think is what it should be.
                      Attached Files

                      Comment


                        #12
                        Nice.
                        The switch is now manual (mcstemp actions vs hs2.x compatible problem), but nice
                        Attached Files

                        Comment


                          #13
                          Next idea for mcstemp virtual thermostar

                          Maybe weakly scheduler?
                          Attached Files

                          Comment


                            #14
                            I do not think I want to go down that path. The virtual thermostat has hooks to allow conditional control based upon another virtual devices and this device could be controlled by any of the scheduling mechanisms available with Homeseer to achieve the desired control effect. When I was doing mcsControlSystems for HVAC then this was one of the abilities that was going to exist, but the UI for it can end up being pretty difficult to make it user friendly.

                            Comment


                              #15
                              ok.
                              any idea for homeseer scheduling mechanism.
                              and any idea for hs2.x Mcstemp actions using (2x2 vthermostat:2 in 1st floor, and 2 in 2nd floor)

                              Comment

                              Working...
                              X