I haven't touched HS3 until today. I figured while I'm waiting for UPB I should at least look at it so I picked the RainRelay8 since it will at least give me devices to play with.
I installed the plug-in, on the same machine that HS2 is installed on, after shutting down HS2 of course. I set the com port to the same as is used on HS3 and set all the settings the same as HS2 in the HS3 plug-in configuration.
I expected things to come right up but they didn't. I get this in my log.
12/2/2013 8:26:25 AM ~!~Info~!~Remote application or plugin has connected: 127.0.0.1:3445
12/2/2013 8:26:25 AM ~!~Info~!~Remote application or plugin has connected: 127.0.0.1:3446
12/2/2013 8:26:25 AM ~!~Info~!~Plug-in Rain8 has connected successfully
12/2/2013 8:26:25 AM ~!~Warning~!~Cannot find requested INI file: D:\Program Files\HomeSeer HS3\Config\Rain8.ini
12/2/2013 8:26:25 AM ~!~Warning~!~Cannot find requested INI file: D:\Program Files\HomeSeer HS3\Config\Rain8.ini
12/2/2013 8:26:25 AM ~!~Plug-In~!~Finished initializing plug-in Rain8
My HS3 rainrelay8 is
[Settings]
RefIDs=7430
My HS3 rainrelay8 is
[controllers]
addresses=1
[settings]
poll_interval=1
Obviously something didn't take. Have I missed a step somewhere. It's almost like the settings are not writing to the ini file when i filled them in on the config page. Does anyone else have this working in HS3?
I installed the plug-in, on the same machine that HS2 is installed on, after shutting down HS2 of course. I set the com port to the same as is used on HS3 and set all the settings the same as HS2 in the HS3 plug-in configuration.
I expected things to come right up but they didn't. I get this in my log.
12/2/2013 8:26:25 AM ~!~Info~!~Remote application or plugin has connected: 127.0.0.1:3445
12/2/2013 8:26:25 AM ~!~Info~!~Remote application or plugin has connected: 127.0.0.1:3446
12/2/2013 8:26:25 AM ~!~Info~!~Plug-in Rain8 has connected successfully
12/2/2013 8:26:25 AM ~!~Warning~!~Cannot find requested INI file: D:\Program Files\HomeSeer HS3\Config\Rain8.ini
12/2/2013 8:26:25 AM ~!~Warning~!~Cannot find requested INI file: D:\Program Files\HomeSeer HS3\Config\Rain8.ini
12/2/2013 8:26:25 AM ~!~Plug-In~!~Finished initializing plug-in Rain8
My HS3 rainrelay8 is
[Settings]
RefIDs=7430
My HS3 rainrelay8 is
[controllers]
addresses=1
[settings]
poll_interval=1
Obviously something didn't take. Have I missed a step somewhere. It's almost like the settings are not writing to the ini file when i filled them in on the config page. Does anyone else have this working in HS3?
Comment