Announcement

Collapse
No announcement yet.

Concord 4 plugin Events - ONLY

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Concord 4 plugin Events - ONLY

    Ok so I had events setup and forgot how I had them...

    If you have a concord 4 alarm please share some events you dont mind sharing. ONLY say what it is, what it does, screen shot...

    so I will start..


    2 events.. that email on status...

    1. arm alarm either armed away or stay - send email alarm set to armed
    2. alarm disabled - send email disarmed
    Attached Files
    HW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64

    HS - HS3 Pro Edition 3.0.0.435

    Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190

    Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface

    #2
    using concord sensor to trigger z-wave lights

    Real basic, but using a concord wireless door sense to trigger the z-wave lighting.
    Attached Files

    Comment


      #3
      Auto-Lock Deadbolt

      Not sure if this is the best way to accomplish this, but it seems to work for me. If you close the shed door and fogret to lock it, it will fire off the z-wave deabolt after the concord door sensor returns to normal for a minute.
      Attached Files

      Comment


        #4
        Thanks guys.. this is what im talking about... so I am doing it a different way.. not using the Security like both of you are doing unless security is in the name and you maybe doing it the way I am but if not.... .my way works... but different. when I get back from vaca im going to be redoing it ALL.. basement is almost done and I want a clean install/sensor list of everything...
        here is my door controlled light...
        I had it where someone would open the door but someone call them and they would close the door and light would stay on so trigger motion too took care of that...
        Attached Files
        HW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64

        HS - HS3 Pro Edition 3.0.0.435

        Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190

        Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface

        Comment

        Working...
        X