I have finally gotten around to setting up my RFID gear I purchased in December. For the life of me, I cannot get the communications to work to the reader. I have read every post contained in the iAutomate forum, but to no avail.
I continue to get Baud Rate Errors in the log..
Jul-11 2:49:43 PM Plug-In Finished initializing plug-in iAutomate RFID
Jul-11 2:49:43 PM iAutomate RFID Error: Could not find a matching baud rate for the RFID reader on COM101, Cannot continue.
Jul-11 2:49:42 PM iAutomate RFID iFindMyBaud=0, FindMyBaud=0, MyBaud=1, sCurrentBaud=115200, sNewBaud=57600
Jul-11 2:49:42 PM iAutomate RFID iFindMyBaud=5, FindMyBaud=5, MyBaud=1, sCurrentBaud=115200, sNewBaud=57600
Jul-11 2:49:41 PM iAutomate RFID iFindMyBaud=4, FindMyBaud=4, MyBaud=1, sCurrentBaud=115200, sNewBaud=57600
Jul-11 2:49:41 PM iAutomate RFID iFindMyBaud=3, FindMyBaud=3, MyBaud=1, sCurrentBaud=115200, sNewBaud=57600
Jul-11 2:49:40 PM iAutomate RFID iFindMyBaud=2, FindMyBaud=2, MyBaud=1, sCurrentBaud=115200, sNewBaud=57600
Jul-11 2:49:39 PM iAutomate RFID iAutomate RFID Version 3.0.0.17
Jul-11 2:49:39 PM iAutomate RFID iAutomate.com RFID Plug-In for Homeseer v3.x
Jul-11 2:49:39 PM iAutomate RFID InitIO called, plug-in is being initialized...
Jul-11 2:49:39 PM Info Plugin iAutomate RFID has connected. IP:127.0.0.1:57607
Jul-11 2:49:39 PM iAutomate RFID Sending a message from the plugin
I tried the serial to USB adapter that I ordered with the system (FTDI unit). I have tried multiple ethernet to serial adapters that work just fine with EVERYTHING else that I have hooked up to my HS system. And I have tried 2 other types of serial to USB adaptors. I have attempted to modify my INI file per the instructions that were referenced here...
http://board.homeseer.com/showthread.php?t=120590
Here is what my INI currenltly looks like.
[Settings]
Taglist=xxxx
Port=5
Converted2=False
sInitBaud=57600
sBaud=115200
[Reader-1]
Location=Main
Name=Main Reader
RSSI=50
Gain=1
Timeout=30
[TAG-xxxx]
Name=4Runner Tag
Timeout=5
Model=LTG501M
ObjectType=6
HoldOnShutdown=False
I am at a complete loss. At this point I have my unit connected directly to the provided Y cable without any extension in place to try to at least to communications working.
Below is my system specs... Any help would be appreciated.
HS3 Pro Edition 3.0.0.187 (Windows)
Windows 7 Enterprise 64-bit
I continue to get Baud Rate Errors in the log..
Jul-11 2:49:43 PM Plug-In Finished initializing plug-in iAutomate RFID
Jul-11 2:49:43 PM iAutomate RFID Error: Could not find a matching baud rate for the RFID reader on COM101, Cannot continue.
Jul-11 2:49:42 PM iAutomate RFID iFindMyBaud=0, FindMyBaud=0, MyBaud=1, sCurrentBaud=115200, sNewBaud=57600
Jul-11 2:49:42 PM iAutomate RFID iFindMyBaud=5, FindMyBaud=5, MyBaud=1, sCurrentBaud=115200, sNewBaud=57600
Jul-11 2:49:41 PM iAutomate RFID iFindMyBaud=4, FindMyBaud=4, MyBaud=1, sCurrentBaud=115200, sNewBaud=57600
Jul-11 2:49:41 PM iAutomate RFID iFindMyBaud=3, FindMyBaud=3, MyBaud=1, sCurrentBaud=115200, sNewBaud=57600
Jul-11 2:49:40 PM iAutomate RFID iFindMyBaud=2, FindMyBaud=2, MyBaud=1, sCurrentBaud=115200, sNewBaud=57600
Jul-11 2:49:39 PM iAutomate RFID iAutomate RFID Version 3.0.0.17
Jul-11 2:49:39 PM iAutomate RFID iAutomate.com RFID Plug-In for Homeseer v3.x
Jul-11 2:49:39 PM iAutomate RFID InitIO called, plug-in is being initialized...
Jul-11 2:49:39 PM Info Plugin iAutomate RFID has connected. IP:127.0.0.1:57607
Jul-11 2:49:39 PM iAutomate RFID Sending a message from the plugin
I tried the serial to USB adapter that I ordered with the system (FTDI unit). I have tried multiple ethernet to serial adapters that work just fine with EVERYTHING else that I have hooked up to my HS system. And I have tried 2 other types of serial to USB adaptors. I have attempted to modify my INI file per the instructions that were referenced here...
http://board.homeseer.com/showthread.php?t=120590
Here is what my INI currenltly looks like.
[Settings]
Taglist=xxxx
Port=5
Converted2=False
sInitBaud=57600
sBaud=115200
[Reader-1]
Location=Main
Name=Main Reader
RSSI=50
Gain=1
Timeout=30
[TAG-xxxx]
Name=4Runner Tag
Timeout=5
Model=LTG501M
ObjectType=6
HoldOnShutdown=False
I am at a complete loss. At this point I have my unit connected directly to the provided Y cable without any extension in place to try to at least to communications working.
Below is my system specs... Any help would be appreciated.
HS3 Pro Edition 3.0.0.187 (Windows)
Windows 7 Enterprise 64-bit
Comment