Announcement
Collapse
No announcement yet.
Radio Shack IP Cams for $25
Collapse
X
-
Radio Shack IP Cams for $25
- Pete
Auto matorHomeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb
HS4 Pro - Ubuntu 22.04 / Lenova Tiny M900 / 32Gb Ram
HSTouch on Intel tabletop tablets (Jogglers) - Asus AIO - Windows 11X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Alexa, Cheaper RFID, W800 and Home AssistantTags: None
-
Originally posted by Pete View Post
Comment
-
THakn you, Guys!!!
I just swung by and picked up their stock of 5. The store manager even sold me her wireless ones for the same price!!!!Transitioning to HS3Pro .298 - WinXPEmbedded
Hometroller S3 Pro - WinXPEmbedded - HSP 2.5.0.81 - BLStat - HSPhone - HSTouch Srvr 1.0.0.73 - Touchpad - BLLan - BLOccupied - DSC Plug 2.0.0.14 - BLStat .38
Comment
-
Nice deal there DF!
Apologies the link about the RS IP cams start here:
http://www.cocoontech.com/forums/ind...ic=18155&st=75- Pete
Auto matorHomeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb
HS4 Pro - Ubuntu 22.04 / Lenova Tiny M900 / 32Gb Ram
HSTouch on Intel tabletop tablets (Jogglers) - Asus AIO - Windows 11X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Alexa, Cheaper RFID, W800 and Home Assistant
Comment
-
Updated FW on IPCams that I purchased. Easy. Here are the instructions. If you have never done anything like this or do not feel comfortable doing the firmware upgrade please don't attempt it; you can brick your camera.
Download the software used to flash the firmware at:
http://www.everbesthk.com/8-download...ade_207_XP.zip
Download the firmware to flash the IP camera at:
http://www.northq.com/download/9006/FW-NQ-9006.1009.zip
Install the software. Use compatibility mode if you are using W7. The application will not run in 64 Bit mode.
1 - Connect the included cable to the IPCam
2 - Install the camera on the same network switch as the upgrading machine.
3 - then insert a paperclip into the reset hole on the side of the unit.
4 - While holding down the reset button, plug in the power adapter.
5 - This will put the device into a firmware upgrade mode.
6 - The power light should flash while the network light should stay solid
Firmware upgrade
1 - You have the run the updater as THE administrator, not just as an administrator in MS Windows 7
2 - Open the Upgrade Utility app you installed earlier,
3 - select your current network adapter, the click browse targets.
4 - If the application finds the device,
5 - click on the Files button then
6 - navigate to where you saved the firmware file.
7 - Once you're ready, click on upgrade.
8 - It should wipe the EEPROM, write the new firmware, then
9 - verify that the image has been written successfully.
The process should take about 5 minutes or so. When it's finished, the device will reboot and once the power and network lights are solid, you should be good to go.
It will pull an IP from your DHCP server. The login is "Administrator" with no password (Blank).
This is the default screen of the IP Camera once you've updated the firmware.
Users of MS IE will need to download an activex component to use the camera.
References:
http://slickdeals.net/forums/showthr...d=0&p=37696463
http://www.sercomm.com/SWI/GUI/PROD_IPS.htm
http://www.northq.com/docs/NQ9006-installation.pdfLast edited by Pete; March 4, 2011, 11:52 PM.- Pete
Auto matorHomeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb
HS4 Pro - Ubuntu 22.04 / Lenova Tiny M900 / 32Gb Ram
HSTouch on Intel tabletop tablets (Jogglers) - Asus AIO - Windows 11X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Alexa, Cheaper RFID, W800 and Home Assistant
Comment
-
Originally posted by Monk View PostI can confirm they work with the HomeSeer NetCam plugin. Also look at the option for DDNS - although there is nothing input into the fields, it is enabled with checkbox.
http://x.x.x.x/img/snapshot.cgi?</PRE>
I am certain PETE will figure out some better ones for streaming!!! (Please)
Comment
-
wondering if this is a better way than the pci card that just stopped working on me.... grrrrrrrrr need to call RS up.. and see if any are localHW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64
HS - HS3 Pro Edition 3.0.0.435
Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190
Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface
Comment
-
From the Very last page of the northq Installation Guide.
Streaming Video/Audio through Internet Camera
To snapshot a JPEG image from the Internet Camera with specified resolution and quality:
http://IP Address/img/snapshot.cgi?[size=value][&quality=value]
Size = 1(160*128)
2(320*240)
3(640*480)
Quality = 1(Very low)
2(Low) 3(Normal)
4(High)
5(Very high)
To stream M-JPEG video from the Internet Camera (M-JPEG mode only)
http://IP Address/img/mjpeg.cgi or http://IP Address/img/main_mjpeg.htm
To stream video through the RTP/RTSP protocol from Internet Camera (MPEG-4 mode only)
rtsp://IP Address/img/media.sav
Note: Users need to specify the desired protocol in the players. To snapshot a JPEG image (160*128, very low quality) through a mobile phone:
http://IP Address/img/mobile.cgiLast edited by raptorsss; March 3, 2011, 12:42 PM.
Comment
Comment